Easto Rubber Process Oil P, 32, 68, 220 and 460 are predominantly paraffinic type rubber process and are blended from selected highly solvent refined base stocks of low sulphur content and with high viscosity index and low evaporation loss. These light coloured oils are having good colour stability during long storage.
Application :
Easto Rubber Process Oil P, 32, 68, 220 and 460 are used in the manufacture of various rubber products from both natural as well as synthetic rubber are preferred by the manufacturers of automotive rubber tubes based on synthetic rubber such as butyl / ethylene propylene rubbers.
Easto Rubber Process Oil P32, 68, 220 and 460 are ASTM 104 Type oils.
Typical Properties :
Typical Properties
Easto Rubber Processing Oil P, 32
Easto Rubber Processing Oil P, 68
Easto Rubber Processing Oil P, 220
Easto Rubber Processing Oil P, 460
Kinematic Viscosity at 40°C., cSt
30 - 34
66 - 70
210 - 240
440 - 480
Flash Point, COC, °C. Min.
190
200
220
250
Aniline Point, °C.
98
100
105
120
Pour Point °C.Max.
-3
-3
-3
-3
Packing : 210 Litres Drums and Bulk
Date of issue: DKG/13-10-2008
DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.
