This is a Versatile High Performance Emulsifier for soluble Cutting Oil. This is general Purpose Emulsifier. Which is soluble in Lubricating Base Stock. Approximately 18-20 % Emulsifier is mixed in a suitable oil as per application need, however for best performance Napthenic oil is preferable which would give better emulsion for longer duration. Required quantity of oil to be added in water with vigorous stirring. This gives stable emulsion. (Normally 5 to 10 % Emulsion is used). Meets IS - 1115 - 1986 Specification.
APPLICATION: Recommended for Variety of Machining Operations for Ferrous and Non Ferrous Metals.
TYPICAL PROPERTIES:
|
CHARACTERISTICS |
EASTO CONKUT |
| Specific Gravity |
1.00 – 1.05 |
| Flash Point | 110 |
| K. Viscosity at 1000 c, cSt | 30 |
| Emulsion Test | Passes |
| PH of 5% Emulsion | 9.0 – 9.50 |
Following are the advantage for Soluble Cutting Oil made out of above EASTO CONKUT.
1) Good Cooling and Lubricating Properties.
2) Good Thermal Stability.
3) No Foaming.
4) Non Corrosive.
5) Long Emulsion Life.
6) Non Staining.
7) Possessing Antibacterial Property.
8) Non Harmful to Operator.
9) Tool Life is Extended.
10) Power Consumption is seduced.
11) Better Finish for the Machined Parts / Components
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.