| |
| Eastto Machine Tool Way Oil |
 |
 |
|
| |
| Introduction : |
 |
Eastto tool way oils 32, 68, 100 & 220 are blended from highly refined base stocks with excellent oxidation stability and are incorporated with oiliness, anti-wear, non-drip and anti-foam additives. The above combination enables the products to carry higher load of machine tools with minimum stick-slip, chatter and improved surface finish to the job. These grades also protect the parts against rust and corrosion with reduction in the consumption of oils. |
| |
| Application : |
|
Eastto tool way oils 32, 68, 100 & 220 are recommended for slide way lubrication of planers, grinders, shapers by horizontal and vertical guide ways. |
|
 |
| |
| Grades : 32, 68, 100 & 220 |
|
|
|
| |
| Typical Properties : |
|
| Characteristics |
Eastto Tool Way Oils |
| 32 |
68 |
100 |
220 |
| Kinematic Viscosity @ 40°C., cSt |
30 to 34 |
64 to 72 |
95 to 105 |
210 to 230 |
| Viscosity Index |
90 |
90 |
90 |
90 |
| Flash Point,°C (COC), Min. |
190 |
190 |
210 |
220 |
| Pour Point, °C, Max. |
-3 |
-3 |
-3 |
-3 |
|
| |
| Packing : 210 Litres Drum |
| Date of issue: 01.07.2009 |
| PDS No. 20300 - 20305 |
| |
| DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control. |
| |
 Top |
| |
|
|
