These are refined Steam Cylinder Lubricant having excellent Thermal and Chemical Stability. Recommended for Lubrication of Worm Gear Drives working under moderate Loads & Speeds.
This is Highly Refined Steam Cylinder Lubricant having Excellent Thermal and Chemical Stability.
APPLICATION: Recommended for Lubrication of Worm Gear Drives working under Moderate Loads and Speeds.
TYPICAL PROPERTIES:
CHARACTERISTICS |
EASTO CYLINDER 600 OIL |
| Kinematic Viscosity @ 40°C, cSt. |
620 to 670 |
| Viscosity Index, Min. |
85 |
| Flash Point °C (COC), Min. |
270 |
PACKING: 210 Litres Drums.
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.
This grade is blended from highly refined base stock containing Corrosion inhibitor Antifoam & Detergent additive, having good oxidation stability. This is alkaline cross head system Oil.
APPLICATION: Recommended for crank case Lubrication of Trunk Piston Type Marine Diesel Engine having separate cylinder Lubrication and also suitable for Hydraulic and circulating system.
TYPICAL PROPERTIES:
CHARACTERISTICS |
EASTO MARINE OIL CH |
| Kinematic Viscosity @ 100°C, cSt. |
10.5-12.0 |
| Viscosity Index, Min. |
90 |
| Flash Point °C (COC), Min. |
220 |
| TBN mg KoH/gm |
8 |
PACKING: 210 Litres Drums.
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.
These Oils are blended from Highly Refined Base Stocks with additives for imparting Anticorrosion, Antifoam, Good Detergency and Oxidation Stability properties. Recommended for crankcase Lubrication of Trunk Piston Type Marine Diesel Engines having separate Cylinder Lubrication and also suitable for Hydraulic and Circulating system.
These Oils are blended from highly refined base stock containing Detergent, Dispersant, Anti foam, Rust inhibitor additive, and have good oxidation stability.
GRADES: 123 & 124
APPLICATION: Recommended for Main Trunk Piston Engine having combined crankcase and cylinder Lubrication of medium speed marine Diesel Engine operating on Fuel up to 1.0% sulphur.
TYPICAL PROPERTIES:
CHARACTERISTICS |
EASTO MARINE OIL |
|
123 |
124 |
|
| Kinematic Viscosity @ 100°C, cSt. |
11.0-12.0 |
14.0-15.5 |
| Viscosity Index, Min. |
90 |
90 |
| Flash Point °C (COC), Min. |
220 |
230 |
| TBN mg KoH/gm. |
12.0 |
12.0 |
PACKING: 210 Litres Drums.
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.
These Oils are blended from highly refined base Stocks, Containing detergent dispersant, Anti Foam Rust inhibitor additive and have good oxidation stability.
GRADES: 330 & 430
APPLICATION: Recommended for main Trunk Engine having combined crankcase and cylinder Lubrication of medium speed Marine Diesel Engine of New Generator of highly rated pressure burning high viscosity Fuel having over 2% sulphur content.
TYPICAL PROPERTIES:
CHARACTERISTICS |
EASTO MARINE OIL |
|
|
330 |
430 |
|
| Kinematic Viscosity @ 100°C, cSt. |
11.0 - 12.0 |
14.0 - 15.0 |
| Viscosity Index, Min. |
85 |
85 |
| Flash Point °C (COC), Min. |
230 |
230 |
| TBN mg KoH/gm |
30 - 32 |
30 - 32 |
PACKING: 210 Litres Drums.
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.
This Grade is blended from highly refined base stocks, Containing Antioxidant, Anti- Rust and Anti- Foam additives This Oil possesses good thermal stability and excellent water separation property.
GRADE: 30
APPLICATION: Recommended for Crankcase Lubrication of Trunk piston type marine Diesel Engines having separate Cylinder Lubrication and for Hydraulic oil as well as air venting system applications.
TYPICAL PROPERTIES:
CHARACTERISTICS |
EASTO MARINE OIL TP 30 |
| Kinematic Viscosity @ 100°C, cSt. |
10.5 to 12 |
| Viscosity Index, Min. |
90 |
| Flash Point °C (COC), Min. |
200 |
PACKING: 210 Litres Drums.
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.
These are High Quality Gear Oils containing Sulphur, Phosphorus Additives for Antiwear and EP Properties. These Oils have good Thermal Stability, Low Foaming Tendency, Excellent Demulsibility and Antirust Properties. Recommended for enclosed Gear Boxes.
EASTO MARINE GEAR EP 100, 150, 220 & 320
These Oils are Moderate Duty Gear Oils.
GRADES: 90 & 140.
APPLICATION: These Oils are recommended for use in Automobile Axles, Manual Transmission Systems and Final Drives of Vehicles not requiring EP Type Oils.
PERFORMANCE LEVEL: Meets API GL-1 Classification, IS - 1277 - 1987 Specifications.
TYPICAL PROPERTIES:
CHARACTERISTICS |
EASTO GEAR OIL |
|
|
90 |
140 |
|
| Kinematic Viscosity @ 100°C, cSt. |
15 to 18 |
30 to 35 |
| Viscosity Index, Min. |
85 |
85 |
| Flash Point °C (COC), Min. |
190 |
230 |
PACKING: 210 Litres Drums.
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.
Specifications will be available on request.
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.
These are Superior Quality Oils blended with Antioxidant, Antiwear, Anticorrosion and Antifoam Additives. Recommended for Hydraulic System of Deck Machinery, Steering Gears, Hatch Covers, Turbo Blowers etc.
These Oils blended from Paraffinic base stock, While EASTO MARINE HYD is blended from Naphthenic Base Stock Containing Antioxidant, Antiwear, Anticorrosion and antifoam additives.
GRADES: 15, 32, 46, 68 & 100.
APPLICATION: Recommended for Hydraulic system steering Gears, hatch covers, Turbo Blowers Compressor Lubrication.
TYPICAL PROPERTIES:
CHARACTERISTICS |
EASTO MARINE HYD OIL |
||||
|
15 |
32 |
46 |
68 |
100 |
|
| Kinematic Viscosity @ 40°C, cSt. |
14-16 |
29-33 |
43-48 |
64-72 |
95-105 |
| Viscosity Index, Min. |
----- |
95 |
95 |
90 |
90 |
| Flash Point °C (COC), Min. |
150 |
190 |
195 |
210 |
210 |
PACKING: 210 Litres Drums.
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.
These are premium quality Turbine Oils blended with selected Antioxidant, Rust Inhibitor and Defoamant Additives. Recommended for all makes of Turbines, Turbine Reduction Gears, Hydraulic and Oil Circulating System.
These oils are blended from Refined Turbine Base Stocks with slelcted Antioxidant, Rust Inhibitor and Antifoam Additives.
GRADES: 32, 68 & 76
APPLICATION: Recommended for all makes of Turbines, Turbine Reduction Gears, Auxillary Turbine Installation, Hydraulic and Circulation Systems.
TYPICAL PROPERTIES:
CHARACTERISTICS |
EASTO MARINE T OIL |
||
32 |
68 |
76 |
|
| Kinematic Viscosity @ 40°C, cSt. |
29 to 33 |
64 to 72 |
74 to 80 |
| Viscosity Index, Min. |
100 |
95 |
95 |
| Flash Point °C (COC), Min. |
200 |
210 |
220 |
PACKING: 210 Litres Drums.
DISCLAIMER: The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of products are beyond our control.